Showing 45 products

    If you would like the limited run black anodized Kollars with your name or company logo laser engraved, please email you logo or name to brian@kaizensource.com - you will get a pdf proof before production. This can add up to 1-5 business days


Starting at $56.50

    Installation:

    • When Purchasing the "Fill" Option, the 30mm thick piece goes in first, then the 57mm goes on top
    • Milled (or grooved) edges always face down in the box to accommodate taper and box extrusions
    • The 8424 foam lid insert is not made to hold tools, but more of an additional pad for compression
Starting at $13.50

    NOTE:  If you would like to keep the parts tray in the box, you can still fit the double 57mm layer

Starting at $13.95
K
Starting at $9.95

    PLEASE READ AS THIS CAN BE CONFUSING:

    1. If you do not already have the BOTTOM-STARTER layers, they are a necessity
    2. GLUE TOGETHER is not necessary, as you can do it yourself
    3. only choose GLUE TOGETHER if you are purchasing foam with SUBSTRATE
    4. LOWER SECTION - Choose the appropriate box - FOAM ONLY, ABS SUBSTRATE, or Masonite SUBSTRATE
    5. UPPER SECTION - Choose the appropriate box - FOAM ONLY, ABS SUBSTRATE, or Masonite SUBSTRATE

    See Description below for more information.



Starting at $14.00

    NOTE:  If you would like to keep the parts tray in the box, you can still fit up to 5 1/4" of inserts below the tray



Starting at $1.95
Starting at $1.90
$8.99  $11.50

    Please note the photos have not yet been updated for the new style dividers.

    Enter your email above if you would like to be notified when they are available.


Starting at $11.50

    50% off of regular price on this insert to blow out overstock!

    Limited quantities



$12.00  $9.00

    The Milwaukee 8428 Rolling tool box will accept 5 foam layers, each 57mm (2.25" thick)


Starting at $29.00

    50% Off regular price on this insert to blow out overstock, Limited Quantities!

$9.00  $4.50

    50% Off regular price on this insert to blow out overstock, Limited Quantities!

$8.00  $3.99
    • All 4 drawers are the same profile.
    • The bottom piece (1st layer) has the 3 grooves, and is available in both 20 & 30mm
    • The "FILL" piece lays on top of the bottom piece and there are NO grooves in it.
    • You can fit up to a combination of 1-20mm thick & 1-30mm thick per drawer
Starting at $12.00
    • The top 2 SMALL drawers are the same profile.
    • The bottom piece (1st layer) has the 3 grooves, and is available in both 20 & 30mm
    • The "FILL" piece lays on top of the bottom piece and there are NO grooves in it.
    • You can fit up to a combination of 1-20mm thick & 1-30mm thick per drawer

    The bottom large drawer is THE SAME profile as the original 2 & 3 drawer boxes

Starting at $12.00

    If you are looking for the Left, Center & Right side inserts, click here

    Check out the HOW-TO video below!

Starting at $13.95
Menu